PRODUCTS CENTER
A base and support are made of Bakelite. A top mold with positioning slots is made of POM (Polyoxymethylene) on the top. When the product is placed into the base, it can be clamped to prevent the product from rotating during screw locking. This keeps the product stable, facilitating the locking of the two screws on the upper and lower parts.
A base tray is made of Bakelite, and a base is made of POM (Polyoxymethylene). The base has a positioning slot inside; when the product is placed into the base, it can be clamped (as indicated by the arrow in the figure) to prevent the product from rotating during screw locking. This ensures the product is stably positioned for easy locking of the two upper screws.
A tray is to be made to place the M3 face shells for easy dispensing. The tray must be drilled with positioning pin holes to facilitate placement on the dispensing machine table. The dispensing machine table has two types of hole distances, and the tray must be compatible with both. Referring to the machine table documents, only a few positioning holes need to be made on the tray.
Type: Standard Type<br> Material: Insulating Bakelite<br> Dimension: 62028060 (mm)<br> Others: The tooling must be engraved with "Bypass Insulation Board Tooling (100K Module Standard Version)". Technical Requirements: The slot positioning must be precise and the support points must be firm, with specific positions referring to the attached drawings. On-site communication is required, and physical samples can be provided for reference.
Let’s Solve Your Test Challenge Together
Whether you need a custom socket, fixture, or complete solution, our engineers will review your files and design hardware that meets your exact requirements.
Copyright© 2025 Shenzhen LD Electronic Technology Co., Ltd.
