PRODUCTS CENTER
swaziland J5 Base Station ATE Test Fixture
Category:
Product Description
The left side is for installing the fixture control part, and the right side is for placing the product. For the base station semi-finished product testing:
1.Two silicone plugs need to be installed at the product placement position to seal with the two water outlets at the bottom of the machine, and two air pressure gauges shall be installed correspondingly to detect air pressure.
2.Two thimbles shall be installed to make contact with the water level detection metal sheets at the bottom of the base station.
We will provide a machine bottom case, which is mounted on the fixture. It is pushed forward and retracted by an air cylinder, and is used for testing infrared, charging, and the air pressure of the dust suction port (an air pressure gauge also needs to be installed here).
Let’s Solve Your Test Challenge Together
Whether you need a custom socket, fixture, or complete solution, our engineers will review your files and design hardware that meets your exact requirements.
Copyright© 2025 Shenzhen LD Electronic Technology Co., Ltd.
